Dragonfly v2.0
Observatory Controller
Ethernet relay and sensor controller for remote roll-off roof observatories.
8
RELAYS
8
SENSOR INPUTS
10/100
ETHERNET (MBIT/S)
12 V DC
NOMINAL SUPPLY
CONTROLLER AND INPUTS
| Relay channels | 8: four NO/NC + four NO |
|---|---|
| Sensor channels | 8: analogue and digital readout |
| Sensor protection | Littelfuse 600R160UR resettable PTC |
| Network | 10/100 Mbit Ethernet; TCP/IPv4 |
| DC power input | 12 V DC nominal; up to 24 V DC |
| Current draw | Less than 1 A |
| Power connector | 5.5 / 2.1 mm jack; centre positive |
| Controller electronics | AT91SAM7XC256 and Raspberry Pi model B (v2) |
| Enclosure / earth | Folded aluminium; earth via any of 16 earth plugs |
| Dimensions | 145 x 60 x 245 mm |
| Mounting | DIN rail compatible (optional) |
RELAY SWITCHING SPECIFICATIONS
| Relay model | Panasonic JS1-5V-F |
|---|---|
| Max. AC voltage | 250 V AC |
| Max. DC voltage | 100 V DC |
| Max. AC current | 10 A |
| Max. DC current | 5 A |
CONTROL, AUTOMATION AND SOFTWARE
- Local web interface and Windows control software
- Customisable roof open/close logic and safety checks
- Autonomous macros; sensor and relay event actions
- CloudWatcher weather-state integration
- ZeroConf remote access; Android and iOS apps
- ASCOM roof/dome and switch; INDIGO and INDIlib
- Three-level password security; relay restrictions
- Direct LAN parking for supported network mounts
SUPPLY AND INSTALLATION NOTES
Included: Dragonfly controller and 8 male banana connectors. Power supply not included.
Installation: Dedicated DC supply recommended. Enclosure must be earthed.
