Wiring diagram

FeatherTouch motor RJ12 connector to Seletek DB9 pinout diagram
RJ12 (female, motor side) to DB9 (male, Seletek side): pin 3→1, 5→2, 4→3, 6→4. RJ12 pins 1 and 2 are not connected, and neither are DB9 pins 5–9. Use a crossed RJ12 cable (1↔6, 6↔1, etc.).

Software configuration

Seletek software configuration screen with the correct FeatherTouch motor settings
Correct settings: motor type Bipolar, 100% power while moving / 0% while stopped, 30000 microseconds between steps, backlash 0, motor mode Lunatico.

For documentation, firmware and software downloads, see the online help manual or the software downloads page. If you run into trouble, get in touch.