Find what you need by task — whether you're just setting up, automating your observatory, connecting to software or going deeper as a developer.
Select your situation and go straight to the relevant guides.
Unbox, connect to your network and configure the DragonFly for the first time. Includes express video tutorials for common scenarios.
Program the DragonFly to act on its own — close the roof on bad weather, reset the PC if it hangs, park the mount. All without the main PC running.
Network disconnections, UDP port conflicts, firmware issues or relay problems — step-by-step diagnosis to get you back up and running.
Use DragonFly with ASCOM, INDIGO, CCDCommander or Node-RED. Control relays and read sensor data from any compatible platform.
Connect temperature probes, humidity sensors, tilt sensors and distance sensors. Control a dew heater or humidifier from within the DragonFly's relay logic.
Integrate DragonFly into your own software using JavaScript, C# or the Seletek low-level protocol. Control relays and read sensors programmatically.
